Testing equipment for door modules

Module 1: Contacting

The key point of the test is the connector or socket of the cable harness that is designed by the manufacturer for a very limited number of connection cycles.

For this reason, the necessary counterpart - our contacting adapter - is of central importance for this application to guarantee a reliable and sustainable test.

» Show module

Module 2: Fixture

In the field of fixtures, there is a wide variety of customer requirements. In one case it is required to integrate the testing technology directly into an assembly fixture, other customers require a separate testing station. A completely automated and self-sufficient test line is particularly suitable for volume models due to extremely short cycle times. The range of variants we offer has already proven itself over many years in a wide variety of production lines.

» Show module

Module 3: Test equipment

The amount of electronics in door panels is constantly increasing due to rising demands on the comfort and design of the interior.
Although TIER 1 suppliers and OEMs receive the electronic components required for this purpose from their upstream suppliers in 100% tested condition, the sensitive components can suffer defects during installation. These impairments can lead to cost-intensive recall campaigns, especially for safety-relevant components. For this reason, a renewed inspection of the components to exclude defects and for documentation purposes is extremely important for our customers.
Often a simple installation or presence check is not sufficient. The manufacturers of the individual components prescribe exactly how the components are to be tested. Our modular testing technology supports you here by covering all the necessary testing scenarios.

» Show module

Module 4: Software

Our software is the central switch point of your test station. It ensures that the test procedures work correctly and that the measured values are processed. It guides the operator through the test process and visualises the test results. All settings and processes are freely configurable and menu-guided. This means that the software for controlling test sequences, handling and robot control can be extended in a modular manner.

» Show module