- Side panels on doors
- Switches, Top-Column modules
- Optical systems, cameras
- DC-/AC motors
- Surface test
PC-controlled laboratory workstation for easily and user-friendly perform torque/angle of rotation/contact measurements as well as tensile/compression force and displacement/contact measurements on analog and bus-coded switches.
System used for simultaneous automatic service life testing of up to four accelerator pedals. On a base plate there is the holder for the specimens and the operating units. The drive is integrated in the test fixture. The complete system includes a climatic chamber with which ambient temperatures of -40°C to +120°C can be simulated.
The universal controller is used in combination with a mechanical device to carry out lifetime tests. The device can be equipped with up to five switches. A wide variety of test devices with up to 3 actuating axes and position feedback can be operated on the universal controller via a plug interface.
Automatic test system for testing the service life of up to five steering column switches or steering angle sensors. The system consists of a mechanical testing device which is actuated via a 3-axis control by means of servo drives. The measuring and testing equipment is located in a separate switch cabinet.
Automatic test system for lifetime testing of up to five steering torque sensors. The mechanical movement is carried out via a 6-axis control system in which the rotation and torsion of the steering column are simulated.
The pneumatically operated system is used for the end-of-line inspection of tachometer sensors on a Hall effect basis. The scope of testing includes the inspection of the installation, the inspection of the assembly quality as well as the electrical test. The discharge of the n.o.k. parts into the lockable container is monitored via a fork light barrier. The system is loaded manually by an operator.